5/27/2023 0 Comments Which dip switch for macPitch 2.54mm, top dial type (DIP), two-state, key type. For example, the specific parameters and dimensions of KJ04RTH of the KJ series are as follows: The thickness is only 3.7mm, and the thickness of the actuator is only 0.6mm, suitable for use in precision instruments. The materials of the actuator and the outer cover are 6TNylon, UL94V-0. Gold-plated contacts, strong reliability. Pitch 2.54mm, top dial type (DIP), two-state, sliding type. For example, the specific parameters and dimensions of KT08RTH of KT series are as follows: The temperature range is also suitable for industrial grade. The material of the actuator and the outer cover is Nylon, UL94V-0. The stroke of the actuator is only 0.9mm. The protruding part of the actuator is only 0.9mm. For example, the specific parameters and dimensions of KL02EHT of KL series are as follows: The same is gold-plated contacts, the temperature range is -40 to 85 degrees, suitable for industrial grade. The actuator is 4/6Nylon, UL94V-0, White the outer cover material is PPS, UL94V-0, Black. Compared with the KG series, its executive mechanism is only half as powerful. Pitch 2.54mm, sliding in-line switch, two states. For example, the specific parameters and dimensions of KG02E of the KG series are as follows: The working temperature is -40 to 85 degrees, suitable for industrial grade. The contacts and terminals are all gold-plated, and the reliability is strong. The housing and actuator are made of PBT, UL94V-0. The strength of the actuator is up to 800gF in each series. The pitch is 2.54mm, it adopts the top dial type (DIP), flat type, which belongs to two states. For example, the specific parameters and dimensions of KE08RTGT of KE series are as follows:Įlectrical Ratings: Switch: 25mA 24VDC Carry: 100mA 24VDC Suitable for use on micro precision equipment. The main features are small size and occupy less space on the circuit board. Its pitch is half the normal DIP switch, which is Pitch 1.27mm. According to the number of digits, it is usually 11 digits such as 1-10 digits and 12 digits. According to the state, there are two states and three states. According to the foot spacing, there is 2.54 The distance between mm and 1.27mm feet is divided into black, red and blue according to the color. According to the way of dialing, they are divided into flat dial and side dial. According to the pin position, they are divided into in-line (DIP) and patch (SMD). If you set the code: 1 for on 0 for off, then: Such components are mostly used for binary coding. These four keys are independent and not related to each other. When the switch is set to ON, the two pins below are connected otherwise, it is disconnected. There are two pins on the top and bottom of the back of each key corresponding to the DIP switch. DIP switches can easily change data.Īs a micro switch that needs to be manually operated, the DIP switch is widely used in many equipment products such as communication and security. The other is hexadecimal code, which is 0~F, and the output is binary code. There are two types of DIP switches, one is the BCD code switch, that is, the value of DIP switches from 0 to 9, and the output is 8421 BCD code. DIP switches are often used in PLC control. DIP switch is an address switch used for operation control, using the principle of 0/1 binary coding.
0 Comments
Leave a Reply. |